32 / 97
3.4 Important monitor commands
Tabelle 16:
Table 16: Important commands of the monitor program
Command meaning
dir [dr:][pattern] Displays the table of contents of the ind
icated device. The flash disk (sd:) is
preset, other possible devices are program memories (ps:), Ram disk (rd:), SD
card(SC:), mass storage device at the usb port(MS:) and floppy disk (fd:) if
available. As patterns, the commonly used MS-DOS patterns are possible,
e.g.: *.din
del [dr:][pattern] Clears the specified files on the specified
device. Also in this case, the flash
disk (sd:) is preset.
cd [dr:] Changes the currently selected device or disp
lays it. The flash disk (sd:) is
preset.
reboot Resets the controller. For an activation
of the bootmonitor, a subsequent
pressing of key '!' is required,
until the bootmonitor identifies it
self (may last 3-4 seconds).
help Displays a help page with the comma
nds of the monitor program.
ver Display of version string
ipconf Configuration of the network parameters for Ethernet interface
hwconf Hardware configuration (extension) of
the controller
To Next Page
Loading...