13 / 97
Introduction Manual ENC66
eckelmann.de
1.2 Controller family ECONTROL CNC
Abbildung 1:
The controller family E-Control CNC comprises the ENC66, ENC55,
PNC55 and CNC55 controllers.
This manual describes the ENC66 controller, that is designed for top
h
at rail mounting.
The memory size and the number of interfaces depends on the or-
dered configuration.
The configuration code is an extension of the order number and is
p
art of the type label. The type label is on the bottom side of the
ENC66.
Figure 1: ENC66
The controller has the following features:
• Numerical controller (CNC) for 2 to 16 axes (depending on the ordered configura-
tion)
• CNC programming as per DIN 66025
• Integrated PLC function, programming as per IEC 61131-3
• 2 to 4 CAN busses (depending on the ordered configuration)
• Usage of local bus modules (LBM) for inputs and outputs and for analog CNC axes
• Connection of field bus modules for inputs and outputs
• Memory extension via SD card slot and USB
You can find more details in /A/.
To Next Page
Loading...