ECKELMANN UA 400 - Page 296

Firmware V3.15
21.04.2021
296/401
•
•
Menu1-7CoolingZone2
COOLING 2 XXXXX
Cooling XXX Current ON/OFF status of cooling
Run Time XX % Cooling relay on time during last day (00:00 - 24:00 hours)
Starts 0 Cooling relay actuations during last day
Temp. R2.3 XXX °C Current supply air temperature Input Z51/Z52
Setpoint R2.3 XXX °C Supply air temperature setpoint for comparison
Hystersis R2.3 XXX K Supply air temperature hysteresis setpoint
Temp. R4.3 XXX °C Current return air temperature Input Z61/Z62
Setpoint R4.3 XXX °C Return air temperature setpoint for comparison
Hystersis R4.3 XXX K Return air temperature hysteresis setpoint
Menu1-8DefrostZone2
DEFROST 2 Pos: XXXXX
Defrost XXX Current ON/OFF status of defrosting
Temp. R2.3 XXX °C Current supply air temperature Input Z51/Z52
Temp. R2.4 XXX °C Current supply air temperature Input Z71/Z72
Def. End. Tmp. XXX °C Defrost termination temperature for comparison
Wait Time xx m Waiting time setpoint
Drip Time xx m Drain time setpoint
Last Defrst XX hh:mm Day and time of last defrost cycle started