ECKELMANN UA 400 - Page 332

Firmware V3.15
21.04.2021
332/401
•
•
•
•
•
Menu2-3-1Zone1
FANS 1 POS: XXXXX Entry Default
Fan Overrun Setpoint fan overrun ---, -10...20 3 °C
Overrun Time Setpoint overrun time 0..100 5 m
Menu2-3-2Zone2
FANS 2 POS: XXXXX Entry Default
Fan Overrun Setpoint fan overrun ---, -10...20 3 °C
Overrun Time Setpoint overrun time 0..100 5 m
Menu2-3-1Zone1AAltern.
FANS 1A POS: XXXXX Entry Default
Fan Overrun Setpoint fan overrun ---, -10...20 3 °C
Overrun Time Setpoint overrun time 0..100 5 m
Menu2-3-1Zone2AAltern.
FANS 2A POS: XXXXX Entry Default
Fan Overrun Setpoint fan overrun ---, -10...20 3 °C
Overrun Time Setpoint overrun time 0..100 5 m
Menu2-4Alarm
ALARM POS: XXXXX
1 Zone 1 Menu 2-4-1
2 Zone 2 Menu 2-4-2Only shown when two-zone operation is set (Menu 6-1)
3 Zone 1A Altern. Menu 2-4-3Not shown when setpoint toggle is disabled (Menu 3-3)
4 Zone 2A Altern. Menu 2-4-4Only shown when two-zone operation is set (Menu 6-1) and setpoint
toggle is not disabled (Menu 3-3)