ECKELMANN UA 400 - Page 331

Firmware V3.15
21.04.2021
331/401
•
•
•
Menu2-2-3Zone1AAltern.
DEFROST 1A POS: XXXXX Entry Default
Def. End. Tmp. XX °C Defrost termination temperature setpoint --, 0..30 5 °C
Wait Time xx m Waiting time setpoint between cooling and
defrosting
0 .. 15 0 m
Drip Time x m Waiting time (drain time) setpoint between
defrosting and cooling
0 .. 15 0 m
2.Defrst Level xx °C Setpoint 2nd defrost stage --, -20..30 –°C
Menu2-2-4Zone2AAltern.
DEFROST 2A POS: XXXXX Entry Default
Def. End. Tmp. XX °C Defrost termination temperature setpoint --, 0..30 5 °C
Wait Time xx m Waiting time setpoint between cooling and
defrosting
0 .. 15 0 m
Drip Time x m Waiting time (drain time) setpoint between
defrosting and cooling
0 .. 15 0 m
Menu2-3Fan
FANS POS: XXXXX
1 Zone 1 Move to menu 2-3-1
2 Zone 2 Move to menu 2-3-2
Only shown when two-zone operation is set (Menu 6-1)
3 Zone 1A Altern. Move to menu 2-3-3
Not shown when setpoint toggle is disabled (Menu 3-3)
4 Zone 2A Altern. Move to menu 2-3-4
Only shown when two-zone operation is set (Menu 6-1) and setpoint toggle is not
disabled (Menu 3-3)