ECKELMANN UA 400 - Page 366

Firmware V3.15
21.04.2021
366/401
•
•
•
•
•
Menu2-3-1Zone1
FANS 1 POS: XXXXX Entry Default
Fan Delay Setpoint fan delay ---, -20...20 0 °C
Menu2-3-2Zone2
FANS 2 POS: XXXXX Entry Default
Fan Delay Setpoint fan delay ---, -20...20 0 °C
Menu2-3-1Zone1AAltern.
FANS 1A POS: XXXXX Entry Default
Fan Delay Setpoint fan delay ---, -20...20 0 °C
Menu2-3-1Zone2AAltern.
FANS 2A POS: XXXXX Entry Default
Fan Delay Setpoint fan delay ---, -20...20 0 °C
Menu2-4Alarm
ALARM POS: XXXXX
1 Zone 1 Menu 2-4-1
2 Zone 2 Menu 2-4-2
Only shown when two-zone operation is set (Menu 6-1)
3 Zone 1A Altern. Menu 2-4-3
Not shown when setpoint toggle is disabled (Menu 3-3)
4 Zone 2A Altern. Menu 2-4-4
Only shown when two-zone operation is set (Menu 6-1) and setpoint toggle is not
disabled (Menu 3-3)