EFI Fiery ES IC-418 - Print a Secure Print Job from the Printer; FTP Printing

3 Make any other required changes to Job Properties.
4 Click OK to close the Fiery ES Properties dialog box.
5 Click OK or Print to close the Print dialog box and send your job to the Fiery ES.
The job is sent to the printer.
Print a secure print job from the printer
1 On the printer control panel, press the Menu button.
2 Press Fiery.
3 Press Secure Jobs.
4 Tap the Secure Code field, use the keyboard to type the same password that you typed in the Secure print field of
the printer driver, and then press OK.
The print jobs that match the password are displayed in the Secure Print screen.
5 Press Show Files.
6 Select your print job or press Print All to print all secure jobs listed.
7 Specify the number of copies to print and then press Print or Delete.
FTP printing
You can send jobs to the Fiery ES using FTP printing if the Fiery ES is set up as an FTP server with FTP Services
configured on it.
For more information about configuring FTP Services, see Command WorkStation Help.
You can use any FTP client application. Before you use FTP printing, the FTP client application requires the
following information (see your administrator):
•
IP address or DNS name for the Fiery ES
•
Directory or path to send the job to, such as the Print queue, Hold queue, or published virtual printers (if
supported)
Note: You cannot print to the Direct connection with FTP printing.
•
User name and password (if required)
You can send the following files to the Fiery ES:
•
PostScript (PS)
•
Printer Control Language (PCL)
•
Tagged Image File Format (TIFF)
•
Portable Document Format (PDF)
Printing
Other Printing Methods
56