EFI Fiery ES IC-418 - To Perform an Advanced Search

After first use, Fiery Remote Scan automatically attempts to connect to the last Fiery ES used in the previous session.
You can immediately start to retrieve any scans initiated at the printer control panel, and use Fiery Remote Scan
Help.
Instructions for configuring and modifying the connection to the Fiery ES are also provided in Fiery Remote Scan
Help.
1
Open Fiery Remote Scan.
2 Click the Choose a Fiery icon (magnifying glass) to open the Connect to Server dialog box.
3 Type the name or IP address in the Connect to a server field.
If you do not have the name or IP address, see To perform an advanced search on page 26.
4
Click the plus sign icon to add it to the server list.
When you click the plus sign, you add the Fiery ES to the list, but do not connect to it. This operation is useful
when you want to add more than one Fiery ES in a session. You can then switch between any Fiery ES in the Fiery
Remote Scan window without opening the Connect to Server dialog box.
5 Click Connect or Cancel.
Clicking Connect adds the Fiery ES to the list at the same time as connecting to it. If the connection was
successful, the Fiery Remote Scan window opens.
If you clicked Cancel, all operations that you did to add or remove the Fiery ES are cancelled. Any server list
changes are discarded.
If you do not have the specific name or IP address of the Fiery ES, you can search by IP ranges or by subnet.
To perform an advanced search
You can search for a Fiery ES in different ways.
1 In the Connect to Server dialog box, click the Choose a Fiery icon (magnifying glass) to open the Search dialog
box.
2 Select Auto Search or select IP Range or Subnet to specify the range to search, and then click Go.
Any available Fiery ES that matches the search criteria is shown. You can filter the search result list by typing a
keyword in the Filter by keyword field.
3 Select the Fiery ES from the results list and click Add.
4 To add another Fiery ES to the list for later use, click the plus sign in the Connect to Server dialog box.
5 In the Connect to Server dialog box, click Connect to add the Fiery ES to My Fiery List and connect to it.
If you clicked Connect and the connection was successful, the Fiery Remote Scan window opens.
If you clicked Cancel, all operations that you did to add or remove any Fiery ES are canceled. Any server list
changes are discarded.
Utilities
Scan
26