2 Select the Fiery ES as your printer and click Properties.
3 In the printer driver, click Layout and then select the Booklet option.
For more information, see Booklet Maker Help.
Access Booklet Maker from the Mac OS printer driver
1 In your application, select File > Print.
2 Select the Fiery ES as your printer, and select Fiery Features from the drop-down list.
3 Click Full Properties in the Quick Access pane.
4 In the printer driver, click Layout and then select the Booklet option.
For more information, see Booklet Maker Help.
Access Booklet Maker from Command WorkStation
1 Double-click your print job in the Held or Printed queue, or right-click the job and select Properties.
2 Click Layout in the Job Properties window.
3 Select the Booklet option.
4 Specify the Booklet Maker settings or click Launch Wizard to specify the settings graphically.
For more information, see Command WorkStation Help.
About Booklet Maker imposition
Imposition is the process of printing multiple pages on single sheets of paper.
When imposed sheets are folded together as signatures, the pages follow in sequential, or reading, order. Booklet
Maker is designed for 2-up imposition, which imposes four individual pages from your document on a single sheet
that is printed duplex.
The order in which pages are imposed is determined by the binding method that you select.
Booklet Maker and Impose
Booklet Maker settings are supported by Impose, if turned on.
You can open a job with Booklet Maker settings in Impose to preview the imposition layout or further modify the
imposition layout, if necessary.
Impose translates and maps all Booklet Maker settings to Impose commands.
Note: When a job with Booklet Maker settings has been edited in the Impose window, the job can no longer be
edited in Booklet Maker. Impose offers more settings that cannot be mapped to Booklet Maker settings.
For more information about Impose, see Utilities.
Printing
Print Options
95
To Next Page
Loading...
