Setting up from the printer control panel
Access Setup
You can use the Setup feature on the printer control panel to perform initial setup of the Fiery ES. You can also use
the printer control panel to access menus for additional Fiery ES functions.
1
Make sure that the Fiery ES is not receiving, printing, or processing files.
2 On the printer control panel, press the Menu button.
3 Press the Fiery logo.
The Fiery ES interface displays.
4
If prompted, log on with Administrator privileges.
The default Administrator password is Fiery.1 (case-sensitive).
5 On the Tools tab, press Setup.
Fiery-related menus on the printer
You can access many of the Fiery ES controls through the printer control panel.
For detailed information about the job management features, see Utilities.
Press Fiery on the printer control panel to access the Fiery ES tabs. Each tab typically includes the following items:
Logout (blue icon at top of
window)
Press to log out. You can then log back in using a different account
(administrator or operator).
Suspend printing (orange icon at
top of window)
Press to suspend communication between the Fiery ES and the printer, such
as for maintenance tasks. Pressing this button interrupts the current print
job and stops additional jobs from printing, but allows jobs to continue to
process on the Fiery ES. After being pressed, the button turns green to
become the Resume printing button.
Resume printing (green icon at top
of window)
Press to resume communication between the Fiery ES and the printer. After
being pressed, the button turns orange to become the Suspend printing
button.
Current tab name (blue button at
bottom of window)
Press to return to the main screen.
Configuration and Setup
Setting up from the printer control panel
12
To Next Page
Loading...
