6 Double-click the PRNTDRV.EXE file to extract the files.
Depending on your operating system, you might be prompted to select a location to extract the files.
After the files are copied to the specified location, the Fiery Driver Installer starts automatically.
Note: The User Account Control (UAC) feature is available on computers with the Windows operating systems
supported by the Fiery ES. You must be the administrator or a user with Administrator privileges to install
printer drivers. Right-click PRNTDRV.EXE and select Run as administrator. For information about supported
operating systems, see Configuration and Setup.
7
Install the printer driver.
Follow the instructions for your operating system to install the printer driver. The procedures are the same as for
installing from the DVD. (See Install and complete the print connection for Windows on page 12.)
Install and complete the print connection for Windows
You need to install the printer driver and then complete the setup for the print connection.
You can install the printer driver from the User Software DVD or download and install it from WebTools.
When you install the printer driver and complete the print connection, you are automatically creating a local printer
(Port 9100). You can modify the port connection later, according to your network type.
1
To install the printer driver, do one of the following:
• Insert the User Software DVD into the DVD drive, type the name of the DVD drive (for example, D:\), browse
to the Windows_User_SW\Print Drivers\Driver_Installer folder, and double-click setup.exe.
Note: When you insert the User Software DVD into the DVD drive, the Fiery Driver Installer may start
automatically.
• From WebTools, after the printer driver is copied to the specified location, the Fiery Driver Installer starts
automatically.
2 In the Fiery Driver Installer dialog box, select the printer driver language and click Next.
The Fiery Driver Installer - InstallShield Wizard appears.
3 Click Next in the Welcome to the InstallShield Wizard for Fiery Driver Installer dialog box.
4 Read the license agreement, click I accept the terms of the license agreement and click Next.
5
For these Windows operating systems, do the following:
•
Windows 10/Server 2016: Click The printer that I want isn’t listed.
• Windows 8.1/Server 2012 R2: Click The printer that I want isn’t listed.
6
To add a local printer on the network, do one of the following:
•
Windows 10/Server 2016: Select Add a local printer or network printer with manual settings.
• Windows 8.1/Server 2012 R2: Select Add a local printer or network printer with manual settings.
•
Windows 7/Server 2008 R2: Select Add a local printer.
Printing
Windows for Fiery ES
12
To Next Page
Loading...
