5
Type the Fiery ES IP address or DNS name.
6 Select Update Fiery Driver When Opened to display the current default settings for the printer when the printer
driver is opened.
7 Click Update.
Note: To confirm that Two-Way Communication is turned on, click the About tab and check that the Fiery ES
name and other server information are displayed.
8 Click Apply, and then click OK.
You must click OK for the printer driver to reflect the correct installable options.
Uninstall printer drivers from Windows client computers
The Printer Delete Utility is installed and used locally to uninstall printer drivers from a Windows client computer.
You do not need to connect to the Fiery ES before you use the software.
1
Install the Fiery Printer Delete Utility using one of the following methods:
• Download Printer Drivers for Windows from WebTools.
Start your Internet or intranet browser and type the DNS name or IP address of the Fiery ES. Expand Software
Downloads. Click the Printer Drivers link under the Windows tab and follow the on-screen instructions to
install.
• Insert the User Software DVD into the DVD drive of the computer.
The Fiery User Software Installer starts automatically.
Note: AutoPlay must be turned on for the Fiery User Software Installer to start automatically.
2 Navigate to the local folder where the printer driver files were downloaded and double-click the Fiery Printer
Delete Utility folder. Double-click setup.exe and follow the on-screen instructions to install the utility.
3 Click Start, select Programs or All Programs, and then select Fiery.
Printing
Windows for Fiery ES
16
To Next Page
Loading...
