Web Services for Devices printing
Web Services for Devices (WSD) allows printing from Windows 7 and later computers, and Windows 8 or later
based tablets.
The WSD option on the Fiery ES must be turned on in Setup. After Setup is complete, you can install the WSD
printer driver for the Fiery ES.
For information about configuring the settings in Setup on the Fiery ES, see Configuration and Setup.
Install the WSD printer driver
You can install the WSD printer driver on Windows 7 and later computers, and Windows 8 or later based tablets.
1
Download the printer driver with WebTools.
For instructions on downloading the printer driver with WebTools, see Download printer drivers with WebTools
on page 11.
2 In the Fiery Driver Installer dialog box, select the printer driver language and click Next.
3 Click Next in the Welcome to the InstallShield Wizard for Fiery Driver Installer dialog box.
4 Read the license agreement, click I accept the terms of the license agreement and click Next.
5 Select Add a network, wireless or Bluetooth printer.
6
Select the printer from the list of available printers and proceed to step 10.
Note: The WSD printer shows the Fiery ES with the printer in parentheses for the name of the printer.
If the printer is not listed, proceed to step 7.
7 Click The printer that I want isn’t listed.
8 Click Add a printer using TCP/IP address or host name and click Next.
9 Select Web Services Device for Device type, type the IP address of the Fiery ES, and click Next.
Connection to the printer is initiated and the printer driver is installed.
10 Click Next and follow the on-screen instructions.
Do not share the printer and do not print a Test Page at this time.
Printing
Other Printing Methods
61
To Next Page
Loading...
