EFI Fiery ES IC-418 - Print from an Application

The following color print options are located in both (1) the Color tab of the printer driver or Job Properties and (2)
in Color Setup in Device Center:
•
Auto trapping
•
Black overprint (for pure black)
•
Black point compensation
•
Black text and graphics
•
CMYK rendering intent
•
CMYK source or device link
•
Combine separations
•
Composite overprint
•
Grayscale rendering intent
•
Grayscale source
•
Optimize RGB transparency (Job Properties only)
•
Output profile
•
Print CMYK gray using black only
•
Print gray using black only
•
Print RGB gray using black only
•
RGB rendering intent
•
RGB source or device link
•
Separate RGB/Lab to CMYK source
•
Spot color matching
•
Substitute colors
•
Use CMYK embedded profiles
•
Use Gray embedded profiles
•
Use RGB embedded profiles
Print from an application
To print from an application, you use the printer driver for your operating system (Windows or Mac OS).
•
For information about how to install the printer driver, set up the Fiery ES for printing, and set print options
with the printer driver, see Printing.
•
When you print a job from a Mac OS application using the printer driver, you must also set color-management
print options appropriately.
Color Printing
Color print options
24