Add a pre-printed cover to a Saddle booklet
1 In the main Booklet Maker window, select Saddle for Booklet Type and a binding edge.
2 Specify the required settings for Paper Size and Page Alignment for the body of the booklet.
3 Select Pre-Printed from the Cover: Content input menu.
4 Click Define Cover and specify the cover media settings.
5 Click OK.
Add an inline cover to a Saddle booklet
1 In the main Booklet Maker window, select Saddle for Booklet Type and a binding edge.
2 Specify the required settings for Paper Size and Page Alignment for the body of the booklet.
3 Select Front & Back Separately from the Cover: Content input menu.
4 Specify the Front cover and Back cover settings.
5 Click Define Cover and specify the cover media settings.
6 Click OK.
Note: When you print an inline cover with top-edge binding, the outside back cover automatically rotates 180
degrees to match the orientation of the front cover.
Booklet Maker cover options for Saddle booklets
For Saddle only, Booklet Maker includes two cover options: pre-printed or inline, for which you can specify media.
You can specify additional options for an inline cover by specifying the following cover options:
•
Content input: Select from Front & Back Separately or Pre-Printed.
•
Front & Back Separately: Select this option to specify an inline cover that prints the cover pages and body pages as
a single job. Separate pages from your document are imposed on a single sheet that forms the cover pages of your
booklet.
You can specify an inline cover when your original document includes the cover pages and/or cover artwork for
your booklet. The cover content may be the first and last pages of your document, or the first two and last two
pages of your document, or any combination.
If you select this option, you can specify the Front cover and Back cover options.
•
Pre-Printed: Select this option to insert a pre-printed cover that will be merged with the body pages of your
booklet, which print separately.
If you select this option, the Front cover and Back cover options are disabled.
Printing
Print Options
97
To Next Page
Loading...
