EFI Fiery ES IC-418 - Job Info Options

•
Fiery Hot Folders
You can assign a group of print options to a Hot Folder. When you specify print options for a Hot Folder, the
print options are assigned to all jobs sent through that Hot Folder. These print options override any default
options.
For information, see Fiery Hot Folders Help.
•
Overrides in the Job Properties window of Command WorkStation
To change job settings from Command WorkStation, double-click a job to display the Job Properties window.
For more information, see Command WorkStation Help.
Print option override hierarchy
Print option settings that were specified in the printer driver can be overridden either in the Held, Printed or
Archived queue of Command WorkStation.
Note: You can use inline editing in the Job Summary pane as another way to override job properties.
The override hierarchy is as follows:
•
Settings from the user’s printer driver override the Fiery ES Setup settings.
•
Settings assigned to Fiery Hot Folders override the user’s printer driver settings.
•
Settings made from the job management tools (Job Properties window of Command WorkStation) override the
user’s printer driver settings.
Print options and default settings
You can use the printer driver interface to configure a particular print option to print a job. If you choose not to
configure the print option, the Fiery ES prints the job with the default setting.
For the default settings of the Fiery ES, as set in the Default settings window (Server > Set Defaults in Command
WorkStation), choosing Default results in the Fiery ES printing the job with the current server defaults or previously
saved settings.
For options that cannot be configured in Setup, the Fiery ES prints the job with a preconfigured Factory Default
setting. When you select the printer driver for North America, the default Document size is Letter or for
International, the default Document size is A4.
To determine the current Setup defaults, print the Configuration page from Command WorkStation. (See Command
WorkStation Help.)
Note: A job uses the Fiery ES default settings (unless otherwise specified) at the time it is processed for printing, not
at the time it is sent to the Fiery ES Hold queue.
The print options are organized according to the printer driver icons (tabs).
Job Info options
The Job Info tab shows all information about the job, including user information that may be required for user
authentication and job handling.
Printing
Print Options
63