2
Follow the on-screen instructions.
Important: Do not attempt to install user software by opening the individual folders for the applications. To
modify or remove user software after you install it on your computer, use the Fiery User Software Installer.
Modify user software from media
1
Insert the User Software DVD into the DVD drive of your computer.
2 In the window that appears, select Modify, Repair, or Remove.
• Modify: Allows you to add new program features or remove currently installed features.
• Repair: Reinstalls all currently installed program features.
• Remove: Removes all currently installed program features.
3
Follow the on-screen instructions.
You can also install the user software from the Fiery ES over the Internet or your company intranet, using
WebTools. Ask your network administrator for the IP address of the Fiery ES.
Use your Internet browser to access WebTools. For complete information about browser and system
requirements, see Configuration and Setup.
Install user software on a Windows computer from WebTools
1
Start your Internet browser.
2
Type the IP address or DNS name of the Fiery ES.
If the home page for the printer appears instead of the WebTools page, click the WebTools link.
3 Click SOFTWARE DOWNLOADS.
4
Click the link for the software that you want to install.
5 Choose Run to open the file or choose Save to save it to your computer.
a) If you choose Save, browse to the location where you want to save the USERSWMI.exe file, and then click
Save.
b) Double-click the USERSWMI.exe file.
6
Type the Fiery ES URL, http://<IP address>, when prompted.
7
Follow the on-screen instructions.
Utilities
Installing user software
8
To Next Page
Loading...
