EFI Fiery ES IC-418 - Accessing the Webtools Home Page; Using Webtools

Accessing the WebTools home page
Use your Internet browser to access WebTools.
For complete information about browser and system requirements , see Configuration and Setup.
1
Start your Internet browser.
2
Type the IP address or DNS name of the Fiery ES.
3
Click the WebTools tab that you want to use.
Using WebTools
The following sections describe how to use the WebTools.
Home
Home lets you:
•
View processing and printing status on the Fiery ES.
•
Manage Fiery options.
•
Check for Product Updates for the Fiery ES.
•
Access Software Downloads that allow you to download installers for user software directly from the Fiery ES.
Docs
Docs allows you to access jobs on the Fiery ES over the Internet or intranet.
You can:
•
Manage and distribute jobs in your mailbox, if scanning to mailboxes is supported on your printer.
Mailboxes are set up with the Configure application (accessible from WebTools or Command WorkStation).
•
Import and print jobs to the Fiery ES depending on access privileges defined by the administrator.
Configure
Configure allows the Fiery ES administrator to view and modify Setup options remotely.
The Configure application is available from WebTools > Configure and from within Command WorkStation.
For instructions on how to use Configure, see Configuration and Setup.
Fiery System Restore
Fiery System Restore allows the administrator to back up the Fiery ES manually, schedule automatic backups, and
restore the Fiery ES from a backup file.
Utilities
WebTools
30