Types of data that can be cleared
The following types of data can be cleared:
•
Held jobs
•
Active jobs
•
Printed jobs
•
Archived jobs that are stored on the server
•
Archived network links to jobs
•
Scan jobs
•
VDP resources (including FreeForm)
•
Job log
•
FTP log
•
Email log
Software updates
The Fiery ES includes multiple update options.
Configure System Updates
You can use the System Updates feature to schedule updates of the system software.
Plan system updates for when the Fiery ES is not in use, such as nights or weekends.
Note: Ensure that the Fiery ES remains powered up during the scheduled update times, allowing enough time for the
update to complete.
Important: If you schedule automatic software updates in addition to automatic system back ups, we
recommend that you schedule the system back ups a minimum of two hours before the software updates. This
ensures a recent back up is available in case a software update causes any issues. Both automatic features check
if Fiery Service is already running before taking action.
While system updates are being installed, print jobs cannot be sent to the Fiery ES.
The Fiery ES automatically reboots during the system update process. It may need to reboot several times.
1 In Configure, log in with Administrator privileges, click Fiery Server > System Updates, and select Enable System
Updates.
2
Specify how frequently the Fiery ES contacts the Update Server.
This feature sets a schedule for downloading updates.
Note: The system updates are performed only when there are no jobs in process. If the system updates might not
occur due to extensive printer usage, increase the frequency of updates (such as daily instead of weekly).
Configuration and Setup
Administration
35
To Next Page
Loading...
