EFI Fiery ES IC-418 - Update the Status on Your Computer

Update the status on your computer
If an optional feature is activated at the Fiery ES, you must update the status of the option on your computer before
you can access the feature from your computer.
Update the status on Windows
Before updating the status on a Windows computer, you must install the printer driver. For information about
installing the printer driver, see Printing.
1 Open the Printers (or Printers and Faxes or Devices and Printers) window.
2 Right-click the Fiery ES and select Properties (or Printer Properties).
3 Click the Installable Options (or Configuration, or Accessories) tab.
4 Select Two-Way Communication.
5 Type the IP address or DNS name and click Update.
6 Verify that the feature appears under Installed Options, and click OK.
Update the status on Mac OS
Before updating the status on a computer running Mac OS, install the printer driver. For information about
installing the printer driver, see Printing.
1 Select Apple menu > System Preferences, and then select Print & Scan, or Printers & Scanners.
2 In the Printer List, select the Fiery ES and click Options & Supplies.
3 Click the Driver tab or the Options tab.
4
Select the option from the appropriate list.
5 Click OK to apply changes.
6 Quit System Preferences.
Fiery Productivity Package
Introduction
8