Create a booklet with the booklet options in the printer driver or Job Properties
Booklet Maker dynamically displays all of the controls applicable to creating a booklet in the main Booklet Maker
window.
1 Select a Booklet Type: Saddle, Nested Saddle, or Perfect.
2 Select a binding edge: Left, Top, or Right.
3 Specify a Paper size.
4 Select Shrink to fit, if required.
5 Specify Page alignment.
6 Specify Creep compensation, if required.
Creep compensation is available for saddle and nested saddle booklets.
7
Specify cover settings, if you selected a saddle booklet.
Note: Cover settings are only available for saddle booklets. (See Adding a cover to a Saddle booklet on page 96).
8 Click OK to save your settings, Cancel to cancel the job, or Print to print your job.
Create a booklet with the Booklet Maker wizard
In the Booklet Maker wizard, accessed by clicking Launch Wizard, the windows display the steps in the booklet-
making process.
1 Click Launch Wizard.
2 Specify the Booklet Type (binding method) and binding edge.
3 If Saddle was selected for Booklet Type, specify cover and content settings, and then click Next.
4 Specify paper size and media settings, and then click Next.
If Saddle was selected for Booklet Type, specify the paper settings for the cover, and then click Next.
If Nested Saddle was selected for Booklet Type, specify number of sheets in a subset.
5 Specify layout settings, and then click Next.
If Saddle or Nested Saddle was selected for Booklet Type, specify creep compensation.
6
View the settings summary.
7 Click Finish to save your booklet, Back to change any settings, or Cancel to cancel the job.
Adding a cover to a Saddle booklet
You can add covers (optional) for Saddle booklets.
Printing
Print Options
96
To Next Page
Loading...
