11 In the Port Name dialog box, type the name of the virtual printer for the printing connection, and click OK.
12 In the Printers box, select your printer and click Next.
Note: Select the printer driver with “US” for North America (the default document size is Letter) or without “US”
for International (the default document size is A4).
13 Type a name for the virtual printer in the Printer name field, and click Next.
This name is used in the Printers window and the queues window.
14
Follow the on-screen instructions.
Indicate whether you want to make the virtual printer the default printer. Do not share the printer and do not
print a Test Page at this time.
Continue with the printer driver installation and at the last screen, click Finish.
The virtual printer is displayed in the Devices and Printers (or Printers and Faxes or Printers) folder.
You can print to a virtual printer as you would print to any other printer. Depending on how the virtual printer is
configured, you may not be able to set some print options.
Note: If you use Command WorkStation to import a PostScript file to a virtual printer and the file already
specifies the number of copies, the setting for the number of copies in the PostScript file takes precedence over
the number of copies set in the virtual printer.
Turn on Two-Way Communication on Windows client computers
You must turn on the Two-Way Communication option to automatically update your printer driver to reflect the
options currently installed on the printer.
Note: The User Account Control (UAC) feature is available on computers with the Windows OS supported by Fiery
ES. You must be the administrator or a user with Administrator privileges to add or change the installable options
after the printer driver is installed. (See Configure installable options on Windows client computers on page 23.)
For information about supported operating systems, see Configuration and Setup.
1
Navigate to the devices and printers on your network.
•
Windows 10/Server 2016: Press the Windows logo key on the keyboard to open the Start screen. From the
desktop, right-click the Start button in the lower-left corner of the screen. Click Control Panel. Click Hardware
and Sound and then click Devices and Printers.
•
Windows 8.1/Server 2012 R2: Press the Windows logo key on the keyboard to open the Start screen. From the
desktop, click the Start button in the lower-left corner of the screen. Click Control Panel and then click Devices
and Printers.
•
Windows 7/Server 2008 R2: In Control Panel, click Network and Internet, and then click the View network
computers and devices link from the Network and Sharing Center list.
The printers are displayed in the Devices and Printers (or Printers and Faxes or Printers) folder.
2 Right-click the Fiery ES icon and choose Printer properties or Properties.
3 Click the Installable Options tab.
4 Select the Two-Way Communication check box.
Printing
Windows for Fiery ES
15
To Next Page
Loading...
