When you install the printer driver with Point and Print, you cannot configure installable options manually.
Installable options are configured automatically. The installed options are displayed in the printer driver when you
select the Two-Way Communication option.
Set up a virtual printer on a Windows computer
You need to install the printer driver and then complete the installation and setup of the virtual printer on the
Windows computer.
The printer driver can be installed from the User Software DVD.
1
To navigate to computers and devices on your network, do one of the following:
• Windows 10/Server 2016: Press the Windows logo key on the keyboard to open the Start screen. From the
desktop, right-click the Start button in the lower-left corner of the screen. Click Control Panel. Click Hardware
and Sound and then click Devices and Printers.
•
Windows 8.1/Server 2012 R2: Press the Windows logo key on the keyboard to open the Start screen. From the
desktop, click the Start button in the lower-left corner of the screen. Click Control Panel and then click Devices
and Printers.
•
Windows 7/Server 2008 R2: In Control Panel, click Network and Internet, and then click the View network
computers and devices link from the Network and Sharing Center list.
2
Search for the Fiery ES on the network using either its name or IP address.
If you cannot locate the Fiery ES, contact your administrator.
3
Double-click the Fiery ES icon to display active print connections.
Virtual printers are listed along with the Print queue, Hold queue, and Direct connection (if those connections
are active). Virtual printers are usually assigned names that indicate the type of job for which they are set up.
4
Insert the User Software DVD into the DVD drive, type the name of the DVD drive (for example, D:\), browse to
the Print Drivers\Driver_Installer folder, and double-click setup.exe.
5 In the Fiery Driver Installer dialog box, select the printer driver language and click Next.
The Fiery Driver Installer installation wizard appears.
6 Click Next in the Welcome to the InstallShield Wizard for Fiery Driver Installer screen.
7 Read the license agreement, click I accept the terms of the license agreement and then click Next.
8
For these Windows operating systems, do the following:
•
Windows 10/Server 2016: Click The printer that I want isn’t listed.
• Windows 8.1/Server 2012 R2: Click The printer that I want isn’t listed.
9
To add a local printer on the network, do one of the following:
•
Windows 10/Server 2016: Select Add a local printer or network printer with manual setting.
• Windows 8.1/Server 2012 R2: Select Add a local printer or network printer with manual setting.
• Windows 7/Server 2008 R2: Select Add a local printer.
10 Select Create a new port, select Standard TCP/IP Port from the Type of port menu, and then click Next.
Printing
Windows for Fiery ES
14
To Next Page
Loading...
