Normal layout options
Normal layout options are used for printing standard documents, from 1 to 16 document pages per sheet.
Duplex
The Duplex print option allows you to print a job with duplex (double-sided) pages.
Select Off for single-sided printing.
Specify Right & left binding or Top binding for duplex (double-sided) printing by specifying the orientation of
printed images.
Note: Two-sided tab (index) printing of 9x11 paper size is not supported.
For more information, see Print Duplex (double-sided) pages on page 103.
Mirror
The Mirror print option, when selected, prints the mirror image of the job.
This option is not available from the Mac OS printer driver and the Job Properties window of Command
WorkStation.
Orientation override
The Orientation Override print option is used with jobs that do not have an orientation or that have incorrect
orientation.
It specifies the orientation to use for finishing settings (for example, stapling) that interact with orientation and
for flowing pages on N-up layouts. In some cases, the orientation of a job may be correct in print, but incorrect
in preview.
This option is accessible only from the Job Properties window of Command WorkStation.
Orientation
The Orientation print option allows you to specify Portrait or Landscape page orientation for the document.
This option is not available from the Mac OS printer driver and the Job Properties window of Command
WorkStation.
N-up option: Page Order
Specify the layout direction when the Pages per Sheet option is set to 2-up or greater.
N-up option: Pages per Sheet
Specify the number of document pages per sheet of paper for your print job.
This option cannot be used with the Create master or Use master options.
Printing
Print Options
71
To Next Page
Loading...
