Calibration
Calibration shows the last date and time the calibration was updated for the printer.
Output profile
The Default output profile print option specifies the output profile used to process a job. Color data in a print job is
converted to the color space of the printer, which is described by the output profile.
For more information, see Color Printing.
Color input options
RGB source
The RGB source print option allows you to specify a source color space definition for printing RGB images,
graphics, and text.
For more information, see Color Printing.
Use RGB embedded profiles
When the Use RGB embedded profiles option is selected, the Fiery ES ignores the RGB Source option and uses
the RGB profile embedded in the print job as the RGB source profile.
For more information, see Color Printing.
RGB rendering intent
Specify a RGB rending intent for the print job.
Specify a default CRD (color rendering dictionary) for color conversion when printing RGB images, graphics,
and text.
Do one of the following:
•
Select Presentation to print files with artwork, graphics, and text. The result is similar to Photographic, with
well-rendered in-gamut colors, such as flesh tones, and more saturated colors.
•
Select Photographic to print photographs, including scanned and digital camera images. The result is less
saturated than Presentation style.
•
Select Relative Colorimetric when color matching is important, but you also want to print white as paper
white. The white point transformation eliminates borders between blank spaces and white objects.
•
Select Absolute Colorimetric when exact colors are required and visible borders are not distracting. There is
no white point transformation.
Note: If you experience tone reproduction problems, set this option to Photographic.
For more information, see Color Printing.
Printing
Print Options
78
To Next Page
Loading...
