Fiery Command WorkStation
A4 tab paper on Bypass tray
In Tray Alignment, if you choose A4 paper on the Bypass tray, it is displayed as simply A4.
Printing
Displaying very long document names
Very long document names are not displayed completely on the printer panel.
5.5x8.5 job not stapled
If you send a 5.5x8.5 SEF job to be stapled, an error message states that it is not possible. You can send the job as LEF
instead, and it will be stapled.
Printing preference window
For the Fiery Driver for Mac OS, if the Printing Preference window is opened for a Microsoft Office document and
then another application is opened and minimized, the Printing Preference window becomes hidden behind the Print
window. This occurs only for the combination of 64-bit Mac OS and 32-bit Microsoft Office.
As a workaround, click Cancel on the Print window then reopen the Printing Preference window.
Grayscale and Black Printing
Mottling may be seen on printed output when you print a job with Grayscale and Pure Black.
Other applications
Printing JDF files
When you print a JDF job from an application, such as Adobe Acrobat, to the Fiery ES with Command WorkStation,
you may encounter a JDF ticket error. As a workaround, right-click the job in the Command WorkStation Held list,
select Ignore JDF ticket conflicts, and then print it. Resolve any runlist errors. All other print settings are preserved.
Customer Release Notes
Fiery ES IC-418 version 1.0
2
To Next Page
