Configuration settings not available for backup in Configure
You can back up most Fiery ES settings in Configure, but there are some exceptions.
•
Fiery System Settings
• Current date and time (but the date and time are indicated by timestamp on the configuration file)
•
Color Settings
• Added Calibration settings
• Color Adjustment features in ImageViewer
Use the Export Color Adjust feature from the File menu in ImageViewer
These features can be backed up by additional methods:
•
Job Log
In Configure, select Job Log to specify how the Job Log is automatically exported.
The following information is not saved with the configuration file:
•
Saved jobs in Hold queue
To back up these jobs, archive the jobs from the Hold queue.
•
Saved jobs in Printed queue
To back up these jobs, archive the jobs from the Printed queue.
•
Job settings
To save these settings, create a Job Properties local preset and back it up to external media.
•
Paper simulation
You can export this information from Command WorkStation, Device Center > Resources > Profiles.
Back up settings with Configure
When you back up settings, you can specify which settings you want to save.
1 In Configure, select Fiery Server > Backup.
2
Follow the on-screen instructions to select the settings.
3 Click Backup to back up the selected settings.
Restore settings with Configure
If you have backed up your settings, you can recover them in Configure after a system crash. You can only recover
the settings that were selected for back up.
1 In Configure, select Fiery Server > Restore.
Configuration and Setup
Administration
33
To Next Page
Loading...
