Set up SMB printing on Windows computers for the Fiery ES
Install the Fiery ES printer driver with SMB printing on Windows computers.
1
To navigate to computers and devices on your network, do one of the following:
• Windows 10/Server 2016: Press the Windows logo key on the keyboard to open the Start screen. From the
desktop, right-click the Start button in the lower-left corner of the screen. Click Control Panel. Click Hardware
and Sound and then click Devices and Printers.
•
Windows 8.1/Server 2012 R2: Press the Windows logo key on the keyboard to open the Start screen. From the
desktop, click the Start button in the lower-left corner of the screen. Click Control Panel and then click Devices
and Printers.
• Windows 7/Server 2008 R2: In Control Panel, click Network and Internet, and then click the View network
computers and devices link from the Network and Sharing Center list.
2
Search for the Fiery ES on the network using either its name or IP address.
If you cannot locate the Fiery ES, contact your administrator.
3
Double-click the Fiery ES icon to display active print connections.
Note: For a description of each print connection, see Configure Help.
You must now create a printer port and install the printer driver from the User Software DVD.
Note: You can use Point and Print to install the printer driver and configure a particular connection to the Fiery
ES, but if you want to configure the print driver to connect to another Fiery ES then you must install the printer
driver from the User Software DVD.
4
Insert the User Software DVD into the DVD drive, type the name of the DVD drive (for example, D:\), browse to
the Print Drivers\Driver_Installer folder, and double-click setup.exe.
5 Select the printer driver language in the Fiery Driver Installer dialog box, and click Next.
The Fiery Driver Installer installation wizard appears.
Printing
Windows for Fiery ES
10
To Next Page
Loading...
