If you select Printer’s default, the job prints according to the settings that the administrator specified in Setup. (See
Print options and default settings on page 63.)
Set print options for a specific print job with the Windows printer driver
After you install the Windows printer driver on the client computer, you can set print options for a print job.
1 In your application, select File > Print, and select the Fiery ES as your printer.
2 Click Properties.
3 Click the Fiery Printing tab.
The Fiery Printing tab serves as the control center for all frequently used printing functions.
When you save the print options in a preset, the following option settings are not reflected:
• Job Info options: Job notes > Secure print, User authentication > Password, Account track > Department name,
Account track > Account password, Server authentication > Authentication server name, Project code, and
Project password
• Layout option: Impose
For information about using presets, see printer driver help.
Note: For a list of print options, see Print options and default settings on page 63.
4
Specify print options and settings for your job.
The print options are grouped by categories. Each group or tab contains print options that are similar or
complement one another.
• Quick Access- Contains duplicate print options from the other job properties groups. It is customizable, so any
print option can be added or removed from the view. The Quick Access tab lets you find print options quickly
without browsing through all of the Job Properties tabs. (See Customize the Quick Access icon in the Windows
printer driver on page 27.)
• Job Info- All information about the job, including user information that may be required for user
authentication and job handling. (See Job Info options on page 63.)
• Media- Attributes and sources of paper to print and insert. (See Media options on page 68.)
• Layout- Defines the imposition of the print job and the booklet process on the media/sheet, except for
positioning that compensates for finishing options, for example, Tray Alignment. (See Layout options on page
70.)
• Color- Color settings and additional features (when optional color features are turned on). (See Color options
on page 77.)
• Image- All Image Quality settings supported by the connected Fiery ES and printer. (See Image options on
page 84.)
• Finishing- Print options related only to finishing equipment on the printer, and also image shifting to
compensate for finishing options. These options override settings in Fiery ES Printer Setup but can be changed
from Command WorkStation. (See Finishing options on page 86.)
• VDP- All Variable Data Printing (VDP) settings, such as FreeForm and advanced VDP settings. (See Variable
Data Printing (VDP) options on page 87.)
Printing
Windows for Fiery ES
26
To Next Page
Loading...
