Endress+Hauser PROline promag 53 - Page 156

Troubleshooting Promag 53 PROFIBUS DP/PA
156 Endress+Hauser
03.2005 PROFIBUS PA
2.03.XX
Software expASMEon:
–New, improved functions
New functions:
– DEVICE SOFTWARE  Display of the device
software
(NAMUR recommendation 53)
–US unit Kgal
50099246/10.03
10.2003 Amplifier:
1.06.XX
Communication module:
2.03.XX
Software expASMEon:
– Language groups
– New error messages
–SIL2
– The totalizer values are also updated
without integration into the cyclic data
transmission
– Support of compatibility with previous
PROFIBUS model Promag
33 with Profile Version 2.0
New functions:
– Operation hours counter
– Intensity of background illumination
adjustable
– Counter for access code
– Upload/download via ToF Tool - Fieldtool
Package
Compatible with service protocol:
– ToF-Tool FieldTool Package
(the latest SW version can be downloaded
under: www.tof-fieldtool.endress.com)
12.2002 Communication module:
2.02.XX
Software adjustment
09.2002 Amplifier:
1.04.XX
Communication module:
2.01.XX
Software expASMEon:
– Data length of advanced diagnosis adjusted
in the cyclic data transmission
!
Note!
As of this software version, a new device
master file (GSD) must be used when replacing
the device!
03.2002 Amplifier:
1.03.XX
Communication module:
2.00.01
Software expASMEon:
– Communication software can be updated via
service protocol
50099246/10.03
07.2001 Com. module: 1.01.00 Software adjustment
06.2001 Amplifier: 1.02.00 Software adjustment
04.2001 Com. module: 1.00.00 Original software 50099246/04.01
09.2000 Amplifier: 1.01.01 Software adjustment
08.2000 Amplifier: 1.01.00 Software enhancement (functional
adaptations)
04.2000 Amplifier: 1.00.00 Original software
Date Software version Changes to software Operating Manual