Endress+Hauser PROline promag 53 - 5.5 Operating Options

Operation Promag 53 PROFIBUS DP/PA
74 Endress+Hauser
5.5 Operating options
For the complete operation of the measuring device, including device-specific commands,
DD (device driver) files are available to the user for the following operating aids and
programs:
5.5.1 Operating program "FieldCare"
Fieldcare is Endress+Hauser’s FDT-based plant Asset Management Tool and allows the
configuration and diagnosis of intelligent field devices. By using status information, you also
have a simple but effective tool for monitoring devices. The Proline flow measuring devices
are accessed via a service interface or via the service interface FXA193.
5.5.2 Operating program "SIMATIC PDM" (Siemens)
SIMATIC PDM is a standardized, manufacturer-independent tool for the operation,
configuration, maintenance and diagnosis of intelligent field devices.