Endress+Hauser PROline promag 53 - Material Load Diagrams

Promag 53 PROFIBUS DP/PA Technical data
Endress+Hauser 179
(DN  300 (12") with Al/Zn protective coating; DN  350 (14") with protective
lacquering)
– ASME: A105; F316L
(DN  300 (12") with Al/Zn protective coating; DN  350 (14") with protective
lacquering)
– AWWA: 1.0425 (316L)
– JIS: RSt37-2 (S235JRG2); HII; 1.0425 (316L)
(DN  300 (12") with Al/Zn protective coating; DN  350 (14") with protective
lacquering)
– AS 2129
– DN 25 (1"): A105 or RSt37-2 (S235JRG2)
– DN 40 (1½"): A105 or St44-2 (S275JR)
– AS 4087: A105 or St44-2 (S275JR)
• Seals: to DIN EN 1514-1
• Ground disks: 1.4435 (316, 316L) or Alloy C22
Promag W
•Transmitter housing:
– Compact housing: powder-coated die-cast aluminum
– Wall-mounted housing: powder-coated die-cast aluminum
•Sensor housing
– DN 25 to 300 (1 to 12"): powder-coated die-cast aluminum
– DN 350 to 2000 (14 to 84"): with protective lacquering
•Measuring tube
–DN  300 (12"): stainless steel 1.4301 (304) or 1.4306 (304L)
(for flanges made of carbon steel with Al/Zn protective coating)
–DN  350 (14"): stainless steel 1.4301 (304) or 1.4306 (304L)
(for flanges made of carbon steel with protective lacquering)
• Electrodes: 1.4435 (316, 316L) or Alloy C22, Tantalum
•Flange
– EN 1092-1 (DIN2501): 1.4571 (316L); RSt37-2 (S235JRG2); CAlloy C22; FE 410 WB
(DN  300 (12") with Al/Zn protective coating; DN  350 (14") with protective
lacquering)
– ASME: A105; F316L
(DN  300 (12") with Al/Zn protective coating; DN  350 (14") with protective
lacquering)
– AWWA: 1.0425 (316L)
– JIS: RSt37-2 (S235JRG2); HII; 1.0425 (316L)
(DN  300 (12") with Al/Zn protective coating; DN  350 (14") with protective
lacquering)
– AS 2129
– DN 150 to 300 (6 to 12"), DN 600 (24"): A105 or RSt37-2 (S235JRG2)
– DN 80 to 100 (3 to 4"), 350 to 500 (14 to 20"): A105 or St44-2 (S275JR)
– AS 4087: A105 or St44-2 (S275JR)
• Seals: to DIN EN 1514-1
• Ground disks: 1.4435 (316, 316L), Alloy C22, Titanium, Tantalum
Material load diagrams
The material load diagrams (pressure-temperature diagrams) for the process connections
can be found in the separate "Technical Information" documentation, which you can
download in PDF format from www.endress.com.
A list of available "Technical Information" documentation can be found in the
"Documentation" →  184 section.