Endress+Hauser PROline promag 53 - Page 178

Technical data Promag 53 PROFIBUS DP/PA
178 Endress+Hauser
• Measuring tube: stainless steel 1.4301 (304)
• Liner: PFA (USP class VI; FDA 21 CFR 177.1550: 3A)
•Electrodes:
– Standard: 1.4435 (316, 316L)
– Option: Alloy C22, Tantalum, Platinum
•Flange:
– All connections stainless-steel 1.4404 (316L)
– EN (DIN), ASME, JIS made of PVDF
– Adhesive fitting made of PVC
•Seals
– DN 2 to 25 (1/12 to 1"): O-ring (EPDM, Viton, Kalrez), gasket seal (EPDM*, Viton,
Silicone*)
– DN 40 to 100 (1½ to 4"): gasket seal (EPDM*, Silicone*)
* = USP class VI; FDA 21 CFR 177.2600: 3A
• Ground rings: 1.4435 (316, 316L) (optional: Tantalum, Alloy C22)
Promag L
•Transmitter housing:
– Compact housing: powder-coated die-cast aluminum
– Wall-mounted housing: powder-coated die-cast aluminum
•Sensor housing
– DN 25 to 300 (1 to 12"): powder-coated die-cast aluminum
– DN 350 to 1200 (14 to 48"): with protective lacquering
•Measuring tube:
–DN 300 (12"); stainless steel 1.4301 (304) or 1.4306 (304L)
–DN 350 (14"); stainless steel 202 or 304
• Electrodes: 1.4435 (316, 316L), Alloy C22
•Flange
– EN 1092-1 (DIN 2501): DN  300: 1.4306; 1.4307; 1.4301 (304); 1.0038 (S235JRG2)
– EN 1092-1 (DIN 2501): DN  350: A105; 1.0038 (S235JRG2)
– AWWA: A181/A105; 1.0425 (316L) (P265GH); 1.0044 (S275JR)
– AS 2129: A105; 1.0345 (P235GH); 1.0425 (316L) (P265GH); 1.0038 (S235JRG2);
FE 410 WB
– AS 4087: A105; 1.0425 (316L) (P265GH); 1.0044 (S275JR)
• Seals: to DIN EN 1514-1
• Ground disks: 1.4435 (316, 316L) or Alloy C22
Promag P
•Transmitter housing:
– Compact housing: powder-coated die-cast aluminum
– Wall-mounted housing: powder-coated die-cast aluminum
•Sensor housing
– DN 15 to 300 (½ to 12"): powder-coated die-cast aluminum
– DN 350 to 2000 (14 to 84"): with protective lacquering
•Measuring tube
–DN  300 (12"): stainless steel 1.4301 (304) or 1.4306 (304L); for flanges made of
carbon steel with Al/Zn protective coating
–DN  350 (14"): stainless steel 1.4301 (304) or 1.4306 (304L); for flanges made of
carbon steel with Al/Zn protective coating
• Electrodes: 1.4435 (316, 316L), Platinum, Alloy C22, Tantalum, Titanium
•Flange
– EN 1092-1 (DIN2501): 1.4571 (316L); RSt37-2 (S235JRG2); Alloy C22; FE 410W B