Endress+Hauser PROline promag 53 - 1.4 Returns; 1.5 Safety Conventions and Icons

Promag 53 PROFIBUS DP/PA Safety instructions
Endress+Hauser 5
• When hot fluid passes through the measuring tube, the surface temperature of the
housing increases. In the case of the sensor, in particular, users should expect
temperatures that can be close to the fluid temperature. If the temperature of the fluid is
high, implement sufficient measures to prevent burning or scalding.
• The manufacturer reserves the right to modify technical data without prior notice. Your
Endress+Hauser distributor will supply you with current information and updates to this
Operating Manual.
1.4 Returns
The measuring device must be returned if repairs or a factory calibration are required, or if
the wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as an ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at www.services.endress.com/return-material
1.5 Safety conventions and icons
The devices are designed to meet state-of-the-art safety requirements, have been tested,
and left the factory in a condition in which they are safe to operate. The devices comply with
the applicable standards and regulations in accordance with EN 61010-1 "Protection
Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures". The devices can, however, be a source of danger if used incorrectly or for
anything other than the designated use.
Consequently, always pay particular attention to the safety instructions indicated in this
Operating Manual by the following icons:
#
Warning!
"Warning" indicates an action or procedure which, if not performed correctly, can result in
injury or a safety hazard. Comply strictly with the instructions and proceed with care.
"
Caution!
"Caution" indicates an action or procedure which, if not performed correctly, can result in
incorrect operation or destruction of the device. Comply strictly with the instructions.
!
Note!
"Note" indicates an action or procedure which, if not performed correctly, can have an indirect
effect on operation or trigger an unexpected response on the part of the device.