Promag 53 PROFIBUS DP/PA Technical data
Endress+Hauser 177
Material
Promag E
• Transmitter housing
– Compact housing: powder-coated die-cast aluminum
– Wall-mount housing: powder-coated die-cast aluminum
•Sensor housing
– DN 25 to 300 (1 to 12"): powder-coated die-cast aluminum
– DN 350 to 600 (14 to 24"): with protective lacquering
•Measuring tube
–DN 300 (12"): stainless steel 1.4301 (304) or 1.4306 (304L) (with Al/Zn protective
coating)
–DN 350 (14"): stainless steel 1.4301 (304) or 1.4306 (304L) (with protective
lacquering)
• Electrodes: 1.4435 (316, 316L), Alloy C22, Tantalum
• Flanges (with protective lacquering)
– EN 1092-1 (DIN2501): RSt37-2 (S235JRG2); Alloy C22; Fe 410W B
– ANSI: A105
– JIS: RSt37-2 (S235JRG2); HII
• Seals: to DIN EN 1514-1
• Ground disks: 1.4435 (316, 316L) or Alloy C22
Promag H
•Transmitter housing:
– Compact housing: powder-coated die-cast aluminum
or stainless steel field housing (1.4301 (304))
– Wall-mounted housing: powder-coated die-cast aluminum
– Window material: glas or polycarbonate
• Sensor housing: stainless steel 1.4301 (304)
• Wall mounting kit: stainless steel 1.4301 (304)
28"
Class D
882
Class D
878 13
30" 1014 1010 13
32" 1213 1208 13
36" 1764 1760 13
40" 1985 1980 13
42" 2426 2421 13
48" 3087 3083 13
54" 4851 4847 13
60" 5954 5949 13
66" 8159 8154 13
72" 9041 9036 13
78" 10143 10139 13
Promag transmitter (compact version): 7.5 lbs
Nominal
diameter
Weights in [lbs]
Compact version Remote version (without cable)
Sensor Transmitter
[inch] ASME/AWWA ASME/AWWA
To Next Page
Loading...
