Commissioning Promag 53 PROFIBUS DP/PA
94 Endress+Hauser
6141 UNIT TO BUS If this function is executed, the measured variables are
transmitted cyclically to the PROFIBUS master (Class 1) with
the system units set in the measuring device.
Options:
OFF
SET UNITS (Transmission is started by pressing
the
F
key)
"
Caution!
Activating this function can cause a sudden
change of the measured variables transmitted to the
PROFIBUS master (Class 1); this, in turn, can
affect subsequent control routines.
▾
Back to the HOME position:
Press and hold down the
X
key for longer than three seconds or
Repeatedly press and release the
X
key = Exit the function matrix step by step
Quick Setup "Communication"
To Next Page
Loading...
