Endress+Hauser Proline Prosonic Flow P 500 - Page 147

Proline Prosonic Flow P 500 HART Operation
Endress+Hauser 147
Parameter Prerequisite Description User interface Factory setting
CPL For the following order code:
• "Application package", option
EJ "Petroleum"
• "Application package", option
EQ "Petroleum & Product
identification"
• The API referenced
correction option is selected
in Petroleum mode
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the calibration factor
which represents the effect of
pressure on the fluid. This is
used to convert the measured
volume flow and the measured
density to values at reference
pressure.
Positive floating-
point number
–
CTL For the following order code:
• "Application package", option
EJ "Petroleum"
• "Application package", option
EQ "Petroleum & Product
identification"
• The API referenced
correction option is selected
in Petroleum mode
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the calibration factor
which represents the effect of
temperature on the fluid. This
is used to convert the
measured volume flow and the
measured density to values at
reference temperature.
Positive floating-
point number
–
CTPL For the following order code:
• "Application package", option
EJ "Petroleum"
• "Application package", option
EQ "Petroleum & Product
identification"
• The API referenced
correction option is selected
in Petroleum mode
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the combined
calibration factor which
represents the effect of
temperature and pressure on
the fluid This is used to convert
the measured volume flow and
the measured density to values
at reference temperature and
reference pressure.
Positive floating-
point number
–
GSV flow For the following order code:
• "Application package", option
EJ "Petroleum"
• "Application package", option
EQ "Petroleum & Product
identification"
• The API referenced
correction option is selected
in Petroleum mode
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the measured total
volume flow, corrected to the
reference temperature and the
reference pressure.
Dependency
The unit is taken from:
Corrected volume flow unit
parameter
Signed floating-point
number
–