Endress+Hauser Proline Prosonic Flow P 500 - Page 146

Operation Proline Prosonic Flow P 500 HART
146 Endress+Hauser
Parameter overview with brief description
Parameter Prerequisite Description User interface Factory setting
Volume flow – Displays the volume flow that
is currently measured.
Dependency
The unit is taken from:
Volume flow unit parameter
(→  97)
Signed floating-point
number
–
Mass flow – Displays the mass flow that is
currently calculated.
Dependency
The unit is taken from the
Mass flow unit parameter
(→  97).
Signed floating-point
number
–
Sound velocity – Displays the sound velocity
that is currently measured.
Dependency
The unit is taken from the
Velocity unit parameter.
Signed floating-point
number
–
Pressure For the following order code:
• "Application package", option
EJ "Petroleum"
• The API referenced
correction option is selected
in the Petroleum mode
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Shows depending on the
setting the external, entered or
measured pressure value.
Signed floating-point
number
–
Flow velocity – Displays the average flow
velocity that is currently
calculated.
Dependency
The unit is taken from:
Velocity unit parameter
Signed floating-point
number
–
Temperature For the following order code:
• "Application package", option
EJ "Petroleum"
• The API referenced
correction option is selected
in the Petroleum mode
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the temperature that
is currently measured.
Dependency
The unit is taken from:
Temperature unit parameter
Signed floating-point
number
–
Density – Displays the density that is
currently calculated.
Dependency
The unit is taken from:
Density unit parameter
Signed floating-point
number
–