Endress+Hauser Proline Prosonic Flow P 500 - Page 83

Proline Prosonic Flow P 500 HART Operation options
Endress+Hauser 83
1
10
2
3
4 5 7
6 9
8
A0028746
 63 Options for remote operation via HART protocol (passive)
1 Control system (e.g. PLC)
2 Transmitter power supply unit, e.g. RN221N (with communication resistor)
3 Connection for Commubox FXA195 and Field Communicator 475
4 Field Communicator 475
5 Computer with web browser (e.g. Microsoft Edge) to access the integrated device web server or computer with
operating tool (e.g. FieldCare, DeviceCare, AMS Device Manager, SIMATIC PDM) with COM DTM "CDI
Communication TCP/IP"
6 Commubox FXA195 (USB)
7 Field Xpert SFX350 or SFX370
8 Field Xpert SMT70
9 VIATOR Bluetooth modem with connecting cable
10 Transmitter
Service interface
Via service interface (CDI-RJ45)
A point-to-point connection can be established to configure the device on site. With the
housing open, the connection is established directly via the service interface (CDI-RJ45) of
the device.
An adapter for the RJ45 to the M12 plug is optionally available for the non-hazardous
area:
Order code for "Accessories", option NB: "Adapter RJ45 M12 (service interface)"
The adapter connects the service interface (CDI-RJ45) to an M12 plug mounted in the
cable entry. The connection to the service interface can be established via an M12
plug without opening the device.
Proline 500 transmitter
2
3
1
A0027563
 64 Connection via service interface (CDI-RJ45)
1 Computer with web browser (e.g. Microsoft Internet Explorer, Microsoft Edge) to access the integrated web
server or with an operating tool "FieldCare", "DeviceCare" with COM DTM "CDI Communication TCP/IP"
2 Standard Ethernet connecting cable with RJ45 plug
3 Service interface (CDI-RJ45) of the measuring device with access to the integrated web server