175
Chapter3 Handling
Cleaning the Paper Feed Roller
If paper dust or adhesive has adhered to the paper feed roller, paper may get jammed, or faint or blurred image
may be printed.
Clean the roller following the procedure below.
1
Check that the printer has been turned off.
2
Open the paper cover.
If paper has been loaded, remove it.
("How to Remove Paper (For the Auto Cutter Model)" on page 59, "How to Remove Paper (For the
Peeler
Model)" on page 60)
3
Remove the spindle.
CAUTION
When cleaning the paper feed roller, do not use a material other than labels. Doing so may damage
the roller resulting in paper jam, or faint or blurred printout.
To Next Page
Loading...
Need help?
General
