5
Safety Precautions
To ensure safe use of the product, be sure to read this manual and the other instruction manuals supplied with
the product before use. Store this manual in a safe place so that you can resolve any unclear points regarding the
product at any time.
Cautions on Installation
WARNING
Do not block the air vents of the product. ("Rear" on page 19)
Doing so can result in heat accumulated in the product causing a fire.
Do not cover the product with a cloth or install it in a poorly-ventilated location.
Furthermore, ensure there is the installation space specified in the manual.
CAUTION
• Do not install/store the product in an unstable location or in a location subject to vibration from
other devices. The product may fall or collapse, causing breakage and possible injury.
• Do not install the product in a location exposed to oily smoke or dust, or in a humid location.
Doing so may cause electric shock or fire.
• When lifting the product, perform the work with the correct posture. Lifting the product with an
inappropriate posture may cause injury.
• Because the product is heavy, do not attempt to carry the product by one person. When unpack-
ing or moving the product, make sure to carry the product by at least two persons. See below for
details on the mass of this product. ("Product Specifications" on page 213)
• Do
not install
the peeler model at a location exposed to strong light such as direct sun rays. Doing
so may cause printing malfunction.
To Next Page
Loading...
Need help?
General
