154
Chapter3 Handling
Spot Color Settings
[Spot Color Settings] allows you to change a specified color to another specified color. First create the color con-
version setting file, then when printing, specify the setting file to print with the color conversion applied. Follow
the procedure below to create the color conversion setting file.
Creating Spot Color Setting File
1
Check the RGB settings of a color you want to convert into another color in the print
data.
The check method for Microsoft Paint is explained here as an example.
[1] Select the Picker tool, and then click on a color you want to check.
[2] Click the [Edit Colors] button to display the Edit Colors window.
[3] Check the RGB settings of the selected color, and write them down.
The printer converts all the portions of print data that use the specified RGB settings into the target color.
If unintended portions are converted into the target color, slightly change the RGB settings of the
portions to make them not to be converted.
The method to check the RGB settings differs by graphic software to another. See the manual or
help of the software you use.
To Next Page
Loading...
Need help?
General
