246
Appendix
Paper Curl
When using a paper feeder, follow the guidelines below to prevent paper from curling.
When leaving the printer and the paper feeder unused for a long term, place the paper feeder so that paper is
not curled in the direction opposite to the roll winding direction.
In addition, avoid letting the paper curl with a radius of 1.5 inches or less even if the paper is curled in the roll
winding direction.
CAUTION
The outer diameter of the roll core should be at least 82 mm.
Avoid the curl opposite to
roll winding direction
Avoid the curl with a radius of 1.5 inches or less
To Next Page
Loading...
Need help?
General
