235
Appendix
Electrical Specifications
Reliability
Power supply Power supply through a power connector
Rated voltage 100 to 240 V
Rated current 0.9 A
Power consump-
tion*
Operating 100V: Average of approx. 39.5 W
230V: Average of approx. 38.7 W
Standby 100V: Average of approx. 7.51 W
230V: Average of approx. 5.82 W
Power off 100V: Average of approx. 0.08 W
230V: Average of approx. 0.24 W
Product life Printer When any one of the following is reached
• 5 years
• 200 km or 1,500,000 pages
• 6,000,000 cycles of carriage movement
• 1,500,000 times of valve operation inside the ink path
Auto cutter
mechanism
Die-cut label (Matte): 1,500,000 cuts
Die-cut label (Synthetic): 500,000 cuts
Die-cut label (Glossy Paper): 1,500,000 cuts
Die-cut label (Glossy Film): 1,500,000 cuts
Die-cut label (High Glossy Paper): 1,500,000 cuts
Continuous label (Matte): 200,000 cuts
Continuous label (Synthetic): 100,000 cuts
Continuous label (Glossy Paper): 300,000 cuts
Continuous label (Glossy Film): 100,000 cuts
Continuous label (High Glossy Paper): 200,000 cuts
• Depending of paper used, the reliability values may differ.
• The cutter reliability may differ if paper is changed to wider paper because it causes differences par-
tially in degree of wear of the cutter blade.
To Next Page
Loading...
Need help?
General
