70
Chapter3 Handling
4
Click [OK].
Paper source and paper detection settings are now complete.
User-Defined Paper
The size, form, type, and other settings of frequently used paper can be registered to the printer driver as a
media definition. This is convenient because you will not need to set the paper settings of the driver when print-
ing from an application if you register a media definition in advance.
Registering New
Register a new media definition by following the steps below.
1
Open the printer driver window.
2
Click the [Media Definition] button on the [General] tab.
The Media Definition screen appears.
If you wish to set the paper size and other settings every time without registering a media definition,
select [Custom] from the [Media Name] pull-down menu on the [General] tab. The various settings on
the [General] tab will become available so that you can set the paper size and other settings.
To Next Page
Loading...
Need help?
General
