69
Chapter3 Handling
3
Make the following settings to match them with the paper you use.
• Media Source: Select how to supply paper to the printer.
• Media detection: Select how to detect print positions.
Setting item Description
Internal roll (supply from Inside) Paper is supplied from inside the
printer. Set roll paper attached to
the spindle into the printer.
External feed (supply from outside)
Paper is supplied from outside
the printer. Place roll paper or
fanfold paper behind the printer.
Setting item Description
Gap detection The print position is detected based on the gaps between labels.
Black mark detection The print position is detected based on the black marks printed on the back or
backing paper of the paper.
No detection Print position detection using gaps or black marks is not performed.
To Next Page
Loading...
Need help?
General
