204
Chapter4 Information for Application Development
Information for Application Development
This chapter provides printer control methods and other information necessary for developing an application.
How to Control the Printer
The printer control method differs depending on how to print from the printer.
Application specifications Printer control method Page
Print using the printer driver that is installed following the
setup workflow described in chapter 2.
Use the printer driver. Page 66
Print using your application developed with reference to
Epson Inkjet La
bel Printer SDK.
Use the Epson Inkjet Label Printer SDK
commands.
Page 205
Print using your application that directly controls ESC/Label
command
s.
Use the ESC/Label commands. Page 205
Print using an existing application and prin
ter driver that
were used for a printer using ZPL II commands.
Change from preprint system to on-demand print system.
Change the printer settings to replace
the printer.
Page 206
To Next Page
Loading...
Need help?
General
