223
Appendix
Roll paper Continuous label (without black marks)
Form Roll paper
Backing paper width 25.4 to 215.9 mm
Label width With waste part: 25.4 to 215.9 mm
Without waste part: 21.4 to 211.9 mm
Label length -
Gap between Labels -
Waste part on the left and right With waste part: -
Without waste part: 2 ± 0.5 mm
Label corner R -
Paper thickness Matte Paper: 0.178 mm
Synthetic: 0.229 mm
Glossy Paper: 0.174 mm
Glossy Film: 0.164mm
High Glossy Paper: 0.188mm
Roll paper core inner diameter 76.2 mm ± 0.5 mm
Roll paper outer diameter 152.4 mm or less
Winding direction Print side must be facing outside (facing inside is unusable)
• Paper with holes or cutouts cannot be used.
Waste part
Waste part
Backing paper
Label area
Backing paper width
Paper feed direction
Label width
Side edge baseline
To Next Page
Loading...
