103
4
The Notification Settings screen appears. Select a setting from the Beep
Notification Setting at an Error pull-down menu.
5
Click Apply Settings.
6
Turn the printer on.
When printing completes
When printing completes, the buzzer sounds for 0.3 seconds. The buzzer setting can be
configured in the printer driver.
1
Display the printer driver. (U "How to Display the Printer Driver" on page
73)
2
Select a setting from the Notification pull-down menu on the General tab.
3
Click OK.
Setting of the buzzer is now complete.
Item Description
None The buzzer does not sound.
Beep at Page End The buzzer sounds after printing each page.
Beep at Job End The buzzer sounds after printing of the last page ends.
Downloaded from ManualsNet.com search engine