Epson TM-C3500 - Page 122

122
Die-cut label
(BlackMark)
• When the adjustment value is +, the cut position moves closer to the
reference position (print start position).
• When the adjustment value is –, the cut position moves away from the
reference position (print start position).
Continuous Paper
(BlackMark)
• When the adjustment value is +, the cut position moves closer to the
reference position (print start position).
• When the adjustment value is –, the cut position moves away from the
reference position (print start position).
Media Form Description
Label
Printable area
Label
Back
i
ng paper
Reference position
(print start position)
Cut position
Paper feed
direction
Printable area
Backing paper
Refe
rence position
(print start position)
Cut position
Paper feed
direction
Downloaded from ManualsNet.com search engine